| |
|
Ensure that your Netopia modem has been programmed with
the C&W ADSL CD and you are able to get connected
to the Internet |
| |
|
Open a web browser and enter the following http://192.168.1.254
in your browsers address field |
| |
|
You should now be prompted to enter a username
and password |
| |
|
Enter the username admin and the password
netopia |
| |
|
You should now see the Netopia web interface appear
in your web browser |
| |
|
Click the expert mode option on the
menu on left |
| |
|
Now click the Ok button to enter expert
mode |
| |
|
Click on Configure in the upper Menu bar |
| |
|
Now click on Advanced |
| |
|
Click on the Default Server link to to setup
a default server |
| |
|
Select IP-Passthrough from the default
server page |
| |
|
Check the DHCP Enable box |
| |
|
Enter the MAC address of the PC, server or firewall
you wish to obtain the public IP address. For a Windows PC you can
obtain this information by typing ipconfig /all at
the command prompt. The information generated gives a detailed summary
for network settings. You are looking for a value for the Physical
Address |
| |
|
Click the Submit button |
| |
|
Click on the yellow triangle in the upper right hand
corner and then click the save and restart in the menu. The modem
will restart in a few seconds |
| |
|
Ensure that the PC, Server or Firewall that you wish
to receive the public IP address is configured to obtain an IP address
automatically using DHCP |
| |
|
Please wait approximately five minutes for your PC,
Server or Firewall to obtain the public IP address |